SWBLD-310907 (MGPU SLS)

Job #382993

 sunny

Hi Paul,


Your build request was completed successfully. The build took 15m to complete.

If you have any questions about the build, please don't hesitate to email us at dl.constructicon@amd.com.

- The Constructicon Team

Build Info:

Request Number SWBLD-310907
Base Build 170124a
Release 17.10
OS W764A, WT64A
Languages ENU JPN CHS DEU ESP FRA ITA PTB ENU JPN CHS CHT CSY DAN DEU ELL ESP FIN FRA HUN ITA KOR NLD NOR PLK PTB RUS SVE THA TRK
Raw Build \\amd.com\swblds\BUILDS244\BaseBuild244\Rage_6\Base\17.10\170124a
Destination \\amd.com\swblds\BUILDS245\OEMCust245\Rage_6\Base\17.10\170124a-310907E-Retail_End_User.2

Build Summary:

Error(s):
No error
Warning(s):
1 
The following ASICs are removed due to duplicate:
  AMD FirePro W8100 (FireGL V) (67A1 1002 XXXX XXXX)
2 
Some details within 'Feature: DAL - Ultra High Resolution > 4K (Option: 4K Disabled)' are not available to 'pjanes'
  Section: ati2mtag_SI_SoftwareDeviceSettings
  Tag:
Configuration conflict(s):
1 
The feature 'SDI peer memory range workaround' has duplicate signups for W764A. The first option is used for the build.
  (Feature Name: SDI peer memory range workaround) - (Option Name: Defaul no key)
  (Feature Name: SDI peer memory range workaround) - (Option Name: Enable SDI peer memory range workaround)

Product SKUs:

Program Marketing Product Name Device ID Vendor ID SS Device ID SS Vendor ID Revision ID
FirePro W9100 (Hawaii) AMD FirePro W9100 (FireGL V) 67A0 1002 XXXX XXXX XX
MGPU SLS AMD FirePro W8100 (FireGL V) 67A1 1002 XXXX XXXX XX
ELLESMERE 67C4_REV_00 Radeon (TM) Pro WX 7100 Graphics 67C4 1002 XXXX XXXX 00
FirePro W7100 (Tonga) AMD FirePro W7100 (FireGL V) 692B 1002 XXXX XXXX XX

Features:

Feature Option (* - override) OS
10 Bit Panel support * Enable 10bit panel support All
10-bit Pixel format support via CCC control * Enable 10-bit Pixel format support via CCC control All
24 hz HDTV mode Support Enable 24 hz HDTV mode support All
2D Tearfree Desktop Disable 2D Tearfree desktop All
3 to 2 Pulldown Show and disable 3 to 2 pulldown feature All
50 hz HDTV mode Support Enable 50 hz HDTV mode support All
576i/p support for CV Disable 576i/p support for CV All
640x480 Landscape mode when rotation is enabled Do not allow setting 640x480 Landscape mode All
7 color LED (Lenovo) Disable 7 color LED All
ACP Binary Not Included All
ACP Support No keys All
ACPI Hotkey Display switching behavior Force clone configuration if two displays are requested All
Advanced Color Management Controls Default Setting All
Advanced Media Framework 1.3 (AMF 1.3) Default Setting All
AGP Allocation Size on Boot Let Video driver determines the maximum AGP allocation size All
AGP Fast Write Enable AGP Fast Write All
AGP Write Disable RV280, M9Plus AGP Write, RV350, RV360 (9x only) W764A
AGP Write Disable RV280, M9Plus AGP Write, RV350, RV360 (9x only) WT64A
AIB Custom No keys All
Alternate DVI operational mode Do not force both DVI outputs into incoherent mode All
AMD Audio HDCP Encryptor Default setting All
AMD Encrypted Branding Files Default setting All
AMD Legacy ASICs Default setting All
AMD OpenCL Runtime and Khronos OpenCL ICD Included All
AMD Universal Video Encoder Interface DLL Default Setting All
Anti-Alias Application Preference All
ASIC GPIO Setting during Suspend Disable All
ASIC ODT for low memory clocks Enable ASIC ODT feature when memory clock is below 300MHZ All
ATI DDC2C support Copy File All
ATI Interface for External Apps Include Files All
ATI Legacy Macrovision Support Enable All
ATI Logo on Property Pages Show ATI logo on ATI property pages All
ATIF functions Disable ATIF support All
Audio filter driver (via display INF) Default setting All
Auto Thermal throttling Enable Auto Thermal throttling All
Auto Upgrade Driver Check Box Default Setting All
AVIVO Dynamic Gamma/Contrast Correction Disable AVIVO Dynamic Gamma/Contrast Correction checkbox All
Baco Support on single GPU Enable Baco All
BD playback on dGPU for PX4.0 Dynamic Scheme Disabled All
Big Software Features Enabled All
Big Software Features - Miscellaneous Control Default setting All
Blank Displays on PowerPlay Switch Driver Selected Blank All
Blank LCD during Power State changes No Blanking of LCD when PowerPlay state changes All
Blue line stereo Enable blue line stereo All
BlueStretch Default setting All
Bootup-Landscape Normal Bootup behavior All
Brightness Mapping Disable All
Bus interface reset workaround Enable workaround for BIF reset All
CAIL - Disable CAIL to Load UCode Default Setting All
Cal support * Include Cal support All
Catalyst Settings - Game Manager Binaries Default Settings All
Catalyst Settings - Video Power Option Default Settings All
CCC - Auto Clock Calibration Enable Auto Clock Calibration All
CCC - Catalyst Control Center [MAIN] Include Catalyst Control Center Support W764A
CCC - Catalyst Control Center [MAIN] Include Catalyst Control Center Support WT64A
CCC - Coinstaller for Windows Update * Not included All
CCC - Desktop shortcut Include desktop shortcut for CCC All
CCC - disable dual graphics support Default setting All
CCC - Hide CCC aspects for vDGA virtualization Default setting All
CCC - Hide LDS Display Warning Default Setting All
CCC - Hide MMVideo page for headless products Included All
CCC - High Performance VQ Tabs (MMVideo_NA) Default setting All
CCC - Hydravision Desktop Manager * Disabled All
CCC - LazyStart Default setting All
CCC - MS WU coinstaller Not Included All
CCC - MS WU Prevent Popup when driver is upgraded and CCC isn't No key All
CCC - Overdrive * Overdrive is not supported in Catalyst Control Center All
CCC - popup for connecting/disconnecting display with audio Show popup All
CCC - PowerPlay BPP Reduction Hide Checkbox All
CCC - UMA Frame Buffer Support, show UMA Frame Buffer tab All
CCC/Radeon Settings - Vivid Colour Enable Default setting All
Change Capture field Mode Copy File All
CHILL - Feature Settings Default Setting All
CHILL - Global Enable Default Setting All
CIM Detection Driver Default setting All
Clock control in DC mode No API Clock control in DC mode All
CMMQS - Internal Sync Methods Default Setting All
Color Space Conversion Use Studio Color Space Conversion All
Component Output Support Disable Component Output Support All
Connected Standby RTPM Default All
Control a desktop in PX to be displayed by a Discrete GPU Included All
Control Display behavior at resume Do not force all displays to be enabled at resume All
Control Panel - 3D Hide 3D tab All
Control Panel - ATI Control Panel for Restricted Users Show Control Panel and ATI taskbar All
Control Panel - ATI Online Registration Do not show ATI Online Registration All
Control Panel - Catalyst Version Catalyst Version 0 All
Control Panel - Catalyst Version (DelReg) Default setting All
Control Panel - Color Show New Color Tab All
Control Panel - Compatibility Warning message box Do not show Compatibility Warning message box All
Control Panel - Composite button Show Composite button All
Control Panel - Confirmation message Show confirmation message when display settings change All
Control Panel - CRT and Projection Configuration No Configuration All
Control Panel - CRT/FPD Troubleshoot tab Show CRT/FPD Troubleshoot tab All
Control Panel - CRTAdjustments Show CRTAdjustments Tab All
Control Panel - CRTAdvanced Show CRTAdvanced Tab All
Control Panel - CRTLimit Show CRTLimit Tab All
Control Panel - D1 selection for HDTV Hide D1 Selection All
Control Panel - D3D Show New 3D Tab All
Control Panel - Desktop Shortcut Do not show Message All
Control Panel - Details button in Options tab Show All
Control Panel - DFP Reduced Blanking Show DFP Reduced Blanking Button All
Control Panel - Displays Page Show Displays Tab, Enable Functions All
Control Panel - Displays Scheme Show Displays Scheme All
Control Panel - Driver Warning Message Show the warning message All
Control Panel - DVI Operation Mode Button Enabled, Show Checkbox, Box checked All
Control Panel - FGL - Advanced Settings Tab Show FGL Advanced Settings tab All
Control Panel - FGL - Configuration Tab Show FGL Configuration tab All
Control Panel - FGL - Main Included FGL Control Panel Support All
Control Panel - GameGamma Show GameGamma Tab All
Control Panel - Global Messages Enable "Global Messages" All
Control Panel - Help Screens Using TV/Getting Started Help All
Control Panel - LaptopDFPAdvanced Show LaptopDFPAdvanced Tab All
Control Panel - LCD On/Off button Do not Gray out LCD On/Off Button All
Control Panel - LCD Panel Scaling Do not gray out LCD Panel scaling controls All
Control Panel - Logo in Options Tab No logo All
Control Panel - Logo on Tabs Show ATI Icon All
Control Panel - Logo on Task Bar Menu Show ATI Logo All
Control Panel - Main Include Control Panel All
Control Panel - Maxx Hide Maxx Tab All
Control Panel - OGL Acceleration Hide OGL Acceleration Option All
Control Panel - OpenGL Show New OpenGL Tab All
Control Panel - Optimized Format field in D-Connector Properties Show Optimized Format selections All
Control Panel - Options Show Options Tab All
Control Panel - Options Tab buttons Show buttons on Options tab All
Control Panel - OVERDRIVE Version OVERDRIVE 2 [Desktop ASIC's] All
Control Panel - Overlay Page Show New Overlay Tab All
Control Panel - Panel Attributes Tab bitmap Show bitmap All
Control Panel - Panning Behaviour Panning Enabled All
Control Panel - Panning Button on Options Page Show All
Control Panel - PowerPlay BPP Reduction Hide Checkbox All
Control Panel - PowerSaving Show PowerSaving Tab All
Control Panel - Primary/Secondary Buttons Show Primary/Secondary Buttons All
Control Panel - Projector Hide Projector Tab All
Control Panel - Property Button on Display Page Do not grey out device Advanced Property Button All
Control Panel - Quick Resolution Enable Menu, Show Button All
Control Panel - Rotation * [ALL] Show Rotation Tab All
Control Panel - Rotation Mouse Tracks Show "Rotation Mouse Tracks" check box All
Control Panel - Scale image to Panel size button Show button All
Control Panel - Scheme for switching LCD to LCD+CRT No hotkey support All
Control Panel - Second monitor on Displays page Show CRT2 All
Control Panel - Seperated Control Panel Include detection for seperated Control Panel All
Control Panel - SmartGart Hide the SmartGart page All
Control Panel - Switch amongst displays Scheme Show "Switch amongst display" Scheme All
Control Panel - Task Bar Tray Icon ATI visible, enable ATIPTAXX.EXE All
Control Panel - Theater Mode Show Theater Mode radio button All
Control Panel - Theater Mode - Same on all Show Same on all radio button All
Control Panel - Troubleshoot button Hide Troubleshoot button All
Control Panel - TRUFORM Support Disable TRUFORM support All
Control Panel - TV Format Selection Show all TV format selections All
Control Panel - TV Regional Setting Mode and Format Selection Enable Regional Setting and Is Selection by Country is default All
Control Panel - TVAdjustments Show Original TV Adjustment tab All
Control Panel - TVAdvanced Show TVAdvanced Tab All
Control Panel - TVAttributes Show TVAttributes Tab All
Control Panel - TVFormat Show TVFormat Tab All
Control Panel - UMA Frame Buffer Hide the UMA Frame Buffer page All
Control Panel - Vertical Sync/Trueform Slider for D3D and OpenGL New Layout- Show Sliders All
Control Panel - Workstation Hide Workstation Tab All
CP_RESYNC feature Use CP_Resync mechanism All
CrossDisplay Support Disable CrossDisplay support All
Crossfire AFR Support Allow AFR Support All
Crossfire autolink support Enable Crossfire support when using a Gemini configuration All
Crossfire logo in Crossfire mode Hide Crossfire logo in Crossfire mode All
CrossFire Next Included for all ASICs All
CrossFire Next Mode Fully Automatic Mode for all ASICs All
CrossFire support in DC mode CrossFire support disabled in DC mode All
Crossfire support on FireGL Enable Crossfire support on FireGL All
Custom SLS Projector Mode * Disabled All
D3D Enable D3D/Disabled for RN50 only All
D3D Exclusive Mode Change Disable D3D Exclusive Mode Change All
DAL - 480P Mode for Component Video Enumerate 480P mode if supported All
DAL - 640x480 in Mode Table Include 640x480 in Mode Table All
DAL - 8BPP in Mode Table Include 8BPP in Mode table All
DAL - ABM/Varibright algorithm Default Setting All
DAL - AC Power Saving Mode with DPMS off (Energy Star) Do not run in battery power saving state when screen turns off All
DAL - Add modes from EDID Standard Timing block Do not add EDID Standard timing modes to driver list All
DAL - Aggressive ABM Default Setting All
DAL - Allow Auto VSR on Embedded Display Default Setting All
DAL - Allow DP Ref Switching for GL Sync Default Setting All
DAL - Allow High Clock on HDMI over DVI Default setting All
DAL - AllowDirectMemoryAccessTrigger Allow All
DAL - AllowType2DPDongle Default Setting All
DAL - Analog detection if EDID mismatch Perform analog detection if EDID mismatch All
DAL - Automatic PowerPlay Color Depth Reduction Disable All
DAL - Black/White Level Adjustment support in CCC Hide Black/White checkbox All
DAL - Black/White Range Adjustment No Black/White range adjustment allowed All
DAL - Boot up Behavior -Activate devices same as Video Bios Follow driver default behavior All
DAL - Bootup behaviour DAL Default Boot up Behavior All
DAL - Component video default mode Use driver default mode All
DAL - Composite Sync control on CCC Image Adjustment page Disable Composite sync adjustment All
DAL - Configuration change Broadcast message Do not allow DAL to activate broadcasting of driver message events All
DAL - CPU P-State setting Set Highest P-State setting All
DAL - CRT and DFP to be activated simultaneously Allow CRT and DFP to be activated simultaneously All
DAL - CRT and TV active simultaneously Allow CRT and TV to be active at the same time All
DAL - CRT and TV on same controller Allow All
DAL - Cursor Caching Default Setting All
DAL - CV Center Timing Support Enable CV Center Support All
DAL - DCE Engine Reset on Hardware Reset Default Setting All
DAL - Default Display Mode for Secondary Display Do not set default mode for Secondary Display All
DAL - Default mode * No Setting All
DAL - Default mode (Vista) * No default mode set All
DAL - Default mode for non-DDC VGA displays No default mode set for non DDC VGA displays All
DAL - Default mode on CE displays which do not support underscan Use standard preferred mode as default All
DAL - Default scaling option for DFP1 Full Screen scaling by default All
DAL - Default scaling option for DFP2 Full Screen scaling by default All
DAL - Default scaling option for DFP3 Full Screen scaling by default All
DAL - Default scaling option for DFP4 Full Screen scaling by default All
DAL - Default scaling option for DFP5 Full Screen scaling by default All
DAL - Default TV behaviour Enable TV if connected All
DAL - Default Virtual EDID * Default setting All
DAL - Detailed Timing modes Dynamically add detailed timing modes during an active session All
DAL - Detect Require Hpd High Disable All
DAL - Display Detection at boot only Do not perform Display detection at boot only All
DAL - Display's page wide aspect ratio checkbox Show Checkbox All
DAL - Downscale Limit Default Setting All
DAL - DP link training failure Show DP link training failure All
DAL - DPMS Audio End Point Control Default setting All
DAL - DRR Support Default Setting All
DAL - Dumb dongle capability Video BIOS to set Dumb dongle Capability All
DAL - Dynamic Bezel Adjustment Support Default setting All
DAL - Dynamic Display Config at resume Enable All
DAL - Enable GPU Scaling Default setting All
DAL - Enable LB Underflow Interupt Default Setting All
DAL - Encoder object information table for external TMDS Do not use graphics object table All
DAL - Fake EDID for LCD to OS Disable All
DAL - Force audio on DisplayPort displays * Audio on DisplayPort displays (Disabled Pre-8.70/Enabled 8.70 and up) All
DAL - Force Enumeration of large desktop modes Do not force enumeration of large desktop modes All
DAL - Forced PAL refreshrates being reported to OS Force reporting of 25 and 50 htz on 1080i and 720p All
DAL - Free Sync Static Screen on Internal Displays Default setting All
DAL - FreeSync - Monitor Specific DRR Override Default setting All
DAL - FreeSync - Support External Panel DRR Default Setting All
DAL - HBR3 Support Default setting All
DAL - HDMI default coherence mode Default setting All
DAL - HDMI Scaling Limitation Show scaling options tab in CCC All
DAL - HDMI to CE mode only Hide checkbox All
DAL - HW CRT EDID Polling Disabled All
DAL - Inter Op Optimized Link Settings Default Setting All
DAL - LCD mode restriction No LCD mode restriction All
DAL - LCD on Primary Controller Do not map LCD to be active on Primary Controller All
DAL - Limit max resolution when in clone mode No mode limit enforced when in clone mode All
DAL - Link Training Tries No keys All
DAL - Low Bandwidth M6 Panel Workaround No mode restriction All
DAL - Lowest/Highest allowed backlight level of embedded Panel Driver to define min/max backlight values All
DAL - Macrovision Report Disable All
DAL - Mapping CRT and DFP types on the same Primary Controller Do not allow mapping on the same Primary controller All
DAL - Mapping LCD and CRT on same Controller Do not Restrict Mapping All
DAL - Mapping of CRT and Panel on same controller(Server ASIC's) Default setting All
DAL - Maximum Supported Virtual Displays Default setting All
DAL - Message when Switching out of native LCD Resolution Do not show message All
DAL - Mode restriction for CRT Do not restrict any modes All
DAL - Mode Restriction for DFP and HDMI modes Do not restrict any modes All
DAL - Mode restriction in Component Video Do not restrict any modes in CV All
DAL - Modes Based on Adapter Bandwidth capabilities Do not Enumerate All
DAL - Modes Based on Display Capability Do not Restrict Modes based on Display Capability All
DAL - Modes supported based on monitor range limits Default Setting All
DAL - MPO Support Default Setting All
DAL - MST Support (8.96 and up) * Enable MST All
DAL - MST Support (pre-8.96) Set maximum number of MST displays to 4 All
DAL - Multiple HDMI Connections Driver default, not included All
DAL - Native panel timing priority on embedded display Enable All
DAL - No Single Selected Timing for DP Default Settings All
DAL - Non DDC Monitor Capability Do not restrict All
DAL - Number of Displays after first Boot Boot with one display All
DAL - Old/New PowerPlay Tab Use New PowerPlay and New Interface All
DAL - Only Allow Height Less Than SD Timing Default setting All
DAL - Only Support Max Color Depth Default setting All
DAL - Optimization Default Setting All
DAL - OVERDRIVE Enable Overdrive, Box Unchecked All
DAL - OVERDRIVE 3 Do not support OVERDRIVE 3 All
DAL - Overdrive Support without Thermal Chip Enable Overdrive Support without Thermal Chip All
DAL - Override Downscale Limit Default Setting All
DAL - Override Max Supported Color Depth Default setting All
DAL - Packed pixel panel support * Enable NDS/WIDE/TOTOKU Packed Pixel Panels All
DAL - Panel Self Refresh (PSR) Support Default Setting All
DAL - Panel Specific Adj Overrides Default setting All
DAL - Panning modes Include panning modes in display properties All
DAL - Panning on CRT and LCD in 1400x1050 No Panning in 1400x1050 All
DAL - Pixel Perfect Output Default setting All
DAL - Power Gating Line Buffer No keys All
DAL - Power Gating Pipe Enabled All
DAL - Power Management - Default state in AC mode Do not set maximum battery while in AC mode All
DAL - Power State after resuming from Hibernation Force power mode to DC after Hibernation All
DAL - PowerPlay "Low Battery" Slider Show Slider All
DAL - PowerPlay "Plugged In" Slider Show Slider All
DAL - PowerPlay Option Settings Enable PowerPlay by default All
DAL - PowerPlay Warning Message Show messages All
DAL - Predefined HDTV modes support Enable Predefined HDTV modes support All
DAL - Prefer Default EDID to Virtual Default setting All
DAL - Preferred mode for Non DDC monitors Set to 1024x768 All
DAL - Priority Sequence Scheme 1 [See description for details] All
DAL - Remove 40 Hz from Detailed Timing Default setting All
DAL - Remove Non 60 Hz Timings Default setting All
DAL - Report Single Selected Timing Default setting All
DAL - Resolution after Installation * Let the Driver determine the setting based on connected devices All
DAL - Resolution Specific DRR Override No keys All
DAL - Resume Support Disable All
DAL - Resynchronize timings of all active displays at each mode Synchronize timings of clone displays All
DAL - Select timing option when panning mode is set on CV Use CV optimized mode when in panning All
DAL - Set Max Resolution and refresh rate Set Max Res for FGL/Server ASIC''s/RS690M All
DAL - Set Min Resolution and refresh rate Mobile restricted below 60htz/FGL restrict below 640x480x16@60 All
DAL - Set Mode after PowerPlay Change Do not Force a set mode after PowerPlay state changes All
DAL - Stereo3D Stereo3D disabled All
DAL - Subsystem Specific DRR Override Default setting All
DAL - Support for 1280x720@50hz for non DDC CRT Enable 1280x720@50Hz for non DDC CRT All
DAL - Support for more than two DVI/HDMI displays * Enable support for all Evergreen GL ASIC's All
DAL - Support for non CE modes listed in EDID Enable support for non CE modes that are listed in EDID All
DAL - Support for PowerPlay Suspend Support PowerPlay Suspend All
DAL - TV and DVI to be activated simultaneously Allow TV and DVI to be activated simultaneously All
DAL - TV format at Boot TV Format from Driver All
DAL - Ultra High Resolution > 4K 4K Disabled All
DAL - User Defined Customized Modes Do not allow customized modes to be enabled All
DAL - VGA (B4 dongle) yellow bang fix after hibernation No delay in the driver All
DAL - Virtual Super Resolution (VSR) Default Setting All
DAL - Virtual Super Resolution (VSR) Initial Enablement Default Setting All
DAL - Wide Aspect Display Scaling Expand to full panel size All
DAL - Wide Aspect Display Timing Support on CRT and DFP Do not support WAD timing on CRT and DFP All
DAL - Wireless Display Default Setting All
DAL - Wireless Display Support Default All
DAL - Workaround for BizLink Dongle (DP to VGA) 350ms delay All
DAL - Workaround for HDMI sound problem No workaround for HDMI sound problem All
DAL flags R6 Generic All
DAL1 - Modes below 640x480 Remove all modes below 640x480 All
DAL2 - NTSC/PAL support Enable NTSC and PAL support All
DDC polling for hotplug detection (Desktop) Disable All
DDC polling for hotplug detection (Mobile non-px) Enable DDC polling for hotplug detection All
DDC polling for hotplug detection (PX) Allow driver to perform its own DMM DDC polling All
Default FreeSync enabled for embedded displays Default Settings All
Default overdrive template Use single display performance mode as our overdrive template All
Default Z-Buffer setting 16, 24 - 8-bit stencil All
De-interlace setting Auto detection of best quality All
Deinterlacing improvement Enable deinterlacing improvement All
Delete folders Default Setting All
Delta AGP Pool size Set increment size for committing AGP memory to 8MB All
Desktop Icon and help screen All
Desktop Brightness No Change All
Desktop Panning Disable All
Desktop rotation (Win7) Enable Win7 desktop rotation All
Detachable Graphics Tray Icon Default setting All
Details and diagnostic pages Disable both All
Detection of Generation2 Speed Enable detection of gen2 speed All
Detection of Monitors on VGA ports * Do not force detection on VGA ports All
Device Guard Default setting All
DFP reduced blanking Disabled, Show Checkbox All
DID Decoupling Registry Key Default Setting All
Digital HDTV Horizontal Timing - Fine Tuning Allow Driver to compensate missing pixels by using HW features All
Direct Draw Enable Direct Draw All
DirectX Detection Normal-No Change All
Disable AGP Disable All
Disable ASIC HW Reset Default Setting All
Disable ASPM pci-e Power saving feature for extra performance Default Setting All
Disable FBC for full screen applications Default Setting All
Disable High Voltage workaround Default Setting All
Disable SAMU Power Gating Default Setting All
Disable Static GFX MG Power Gating Default Setting All
Disable UVD Power Gating Dynamic Default Setting All
'DisableLCD' flag Enable All
'DisableTimeStampWriteBack' flag Enable TimeStampWriteBack W764A
'DisableTimeStampWriteBack' flag Enable TimeStampWriteBack WT64A
'DisableVPE' flag Enable All
Display connectivity update in TMM No display connectivity update in TMM All
Display Output Post Processing (DOPP) * DOPP is turned on using a special DOPP app All
Display Power Down at Shutdown Do not allow Display power down sequence All
Display Version Exclude Display Driver information All
Display Virtualization No local video memory reserved All
DMM reporting full screen scaling to OS Do not report DMM full screen scaling to OS All
Dongle Translation Do not force driver to translate Dongle All
DOPP Engine and DSE Manager Applications Default setting All
Double Data Rate support Disable 24 bit double data rate support All
Downgrade HDMI to DVI No Keys All
DPM clock info in CCC Driver to determine whether to show max DPM clock info in CCC All
DPM Switching within UVD modes DPM within UVD modes is enabled All
Driver bootup without CRT No VGA output when CRT is not connected All
Driver detection for out-of-spec DVI and HDMI panels Do not allow driver to detect out-of-spec DVI and HDMI panels All
Driver Dithering * Disable Driver dithering All
Driver install flag Do not include file All
Driver Mutex Enable Maximum concurrency and performance All
DriverInfoAddreg Enabled All
Driving display clock No switching to core clock for modes that do not have enough bandwidth All
DTE Disable Disable All
Dual TV-Output Disable Dual TV-Output All
Dual View Enable Dual View W764A
Dual View Enable Dual View WT64A
DVI frequency on high-resolution displays checkbox in CCC Checkbox unchecked by default All
DVI Single Link Frequency Do not limit DVI Single Link Frequency All
DX10 Support Enable DX10 Support All
DX12 Binary Included All
DX9 Thermal Throttling Disable DX9 Thermal Throttling All
Dynamic clock switching for DVD/Video playback Force higher clock settings for better video playback All
Dynamic clocking in Hardware Default PV Setting All
Dynamic GPR allocation strategy Disable Dynamic GPR allocation All
EDC Behavior Enable EDC on 400 All
Enable AMD Tessellation Optimziation Default setting All
Enable DFS Bypass Default Setting All
Enable dGPU BACO Default Setting All
Enable FPS Feature Default Setting All
Enable Secure Multimedia Firmware Loading Default setting All
eRecord event log Enable eRecord message Popops All
ExcludeID (Barco) * Exclude Barco Device IDs All
ExcludeID (Falcon) Exclude Falcon Device IDs All
ExcludeID (Hawaii) Default Setting All
External CV Clock tolerance Set pixel clock tolerance of .25% All
External Device Communication Utility Include file All
External Display as primary monitor Prevent user from selecting external display as primary All
External Event - ADC [Main] Enable Auto Display Configuration W764A
External Event - ADC [Main] Enable Auto Display Configuration WT64A
External Event - ADC- Apply current mode at lid close Disable ADC to apply the current mode at lid close All
External Event - ADC- At ACPI HotKey Do not apply Auto Display Configuration at HotKey ACPI All
External Event - ADC- At Docking Do not apply Auto Display Configuration at Docking All
External Event - ADC- At Ext Event HotKey Do not apply Auto Display Configuration at HotKey external event All
External Event - ADC- At Fast User Switch Do not Apply Auto Display Configuration at Fast User Switch All
External Event - ADC- At HotPlug Do not apply Auto Display Configuration at HotPlug All
External Event - ADC- At Lid Switch Do not apply Auto Display Configuration at Lid Switch All
External Event - ADC- At Logon Do not apply Auto Display Configuration at Logon All
External Event - ADC- At Resume Do not apply Auto Display Configuration at Resume All
External Event - ADC- At SBios Request Do not Apply Auto Display Configuration at System Bios Request All
External Event - ADC- At Session Change Do not apply Auto Display Configuration at Session change All
External Event - ADC- Global Profile Set Single Profile All
External Event - ADC- Handle Exclusive Mode Enable Exclusive Mode Handling All
External Event - ADC- Log Errors (Vista) Enable eRecord logging All
External Event - ADC- Logical Mapping Support Enable ADC Logical Mapping Support All
External Event - ADC- No Extend at Hotkey Do not disable Extended Desktop for Hotkey Display Switch All
External Event - ADC- Panel Expansion Settings Do not add Panel Expansion Settings All
External Event - ADC- Preferred mode based on Ext. Device EDID Do not generate preferred mode based on Exteranl Device EDID All
External Event - ADC- Profile Key Setup Setup profiles based on unique display ID All
External Event - ADC- Rotation Support Do not Apply Auto Display Configuration at Rotation All
External Event - ADC- Save Profile At ShutDown ADC to not save profile at shut down All
External Event - ADC- Save Profile Globally (Vista) Save profiles per user All
External Event - ADC- Selected Profiles Do not Save Profile by Selected Displays All
External Event - ADC- Single profile per Device type Do not use Single Profile All
External Event - ADC- Support Hot-Undocking Do not Apply ADC at Hot-Undocking All
External Event - ADC- Triggered by TMM Enable ADC Triggered by TMM All
External Event - BBB Support Default setting All
External Event - Workaround for Win 10 LDA Reboot Issue Set to 2 All
External Event: Broadcast Display Change Message Disable All
External Event: Customized Secondary CRT Port Function on HotPlu No customized secondary CRT Port function All
External Event: Default BPP for 2nd device on displays setting Do not set default color depth to 32bpp All
External Event: Detect on Hotkey Select Feature Enable W764A
External Event: Detect on Hotkey Select Feature Enable WT64A
External Event: Detection of display switching hotkeys Enable detection of display switching hotkeys All
External Event: DFP Hotplug Mapping DFP is enabled on the first available Controller at hotplug All
External Event: Driver Message Support Enable All
External Event: Hotkeys to change the display res. on CV device Do not allow Hotkeys to change the display resolution All
External Event: HotPlug * Enable All
External Event: Monitor EDID Preferred mode at first boot Use Vista OS default mode All
External Event: Mouse Rotation Disable Mouse Rotation All
External Event: Multi-Session Support Multi-Session Support All
External Event: Polling Enable All
External Event: Polling (Vista) Disable All
External Event: Polling Utility Installed - XP (Old EEU) - Vista (new EEURA) (Valid for 8.60 and up) All
External Event: PowerPlay Battery Detection Feature Enable All
External Event: Preferred mode of device Do not set preferred mode of device when plugged in All
External Event: Restore extended desktop Do not restore extended desktop settings W764A
External Event: Restore extended desktop Do not restore extended desktop settings WT64A
External Event: Set Landscape As Default In Clone Mode Enable landscape as defalt mode in clone mode All
External Event: Set Max Resoluion for Docking/Undocking Disable All
External Event: Set Native Mode on resume Do Not Force native mode All
External TMDS Reduce Blanking * Enable External TMDS Reduce Blanking with default threshold All
EyeFinity - Multi Grid Support Enable Multi Grid Support All
EyeFinity - SLS grid display limit No display limit for SLS grid All
Eyefinity support Default setting All
FIREGL - Large Panel Support Include Large Panel Support All
FIREGL - Specific's Default values All
Firepro Software Version Not included All
Flushing of the 2D Cache Disable All
Force Single Controller on a dual Controller ASIC Do not report Single Controller on a dual Controller ASIC All
Frame Buffer Compression (Windows) Enabled for Wrestler & Liano/Disabled for all others All
FSA Support FSA not supported All
Gamma Setting Allow Control Panel/CCC and applications to change Gamma Setting consistently All
Gen2 Speed Support Enable Gen2 Speed for RV630/Disable for RV610 All
Geometric Instancing Do not enable Geometric Instancing All
GFX Power gating during UVD playback Disable GFX Power gating during UVD playback All
GPU - Autodesk Enabled All
Graphics Power Gating Default Setting All
GSL framelock Disable GSL framelock feature All
H.264 Level 5.1 support in UVD level 5.1 as default All
Hardware Acceleration Hardware Acceleration set to 0/RN50 set to 3 All
Hardware acceleration for HD playback Disable HW Acceleration for RS600 All
Hardware Cursor * Hardware Cursor Enabled All
Hardware Linear Gamma Ramp Disable hardware linear gamma ramp All
Hardware Overlay in desktop rotation mode Enable Hardware overlay in desktop rotation mode All
Hardware Sub-picture Support No Hardware Sub-picture support All
HBR2 Support * Disable HBR2 Support for Trinity only All
HCF on PX platforms Use PX on PX enabled systems All
HCF support on RV610 Pro and RS780C Disable HCF support on RV610 Pro and RS780C All
HD Content Protection Default Setting All
HDMI output color depth Set HDMI color depth to 10 bit or higher All
HDMI Pixel Format selection support Default Pixel format for HDMI will be YCrCb444 All
HDTV / Component video modes checkbox Checkbox unchecked by default All
HEVC - Enable for OEM Builds Default setting All
HEVC - Master Key Default Setting All
Hide shader cache control Default setting All
HotKey Zoom in/Zoom out LCD Resolution Disable All
Hot-plug poller * Enable All
HP: Control Smooth Brightness Disabled All
HSA - INF Install Default Setting All
HSA - SC/Finalizer Dynamic Library Default Setting All
HSA - User Mode Runtime Libraries Default setting All
HW Multi View Codec decode Disable MVC decode All
HW Overlay Enable HW Overlay All
HydraVision Desktop Manager by default Do not enable HydraVision Desktop Manager All
Hydravision Pop-ups at cursor No default set for Hydravision Pop-up All
IBM Oemdspif.dll file Copy File All
IBM Phildec WDM Driver Disabled All
Images on the Displays Page Normal All
ImageWrite Performance (WinxP) Disable ImageWrite Performance All
Initial AGP Pool size Set Initial AGP memory size to 32MB at bootup All
Initial Rotation angle after installation No Rotation angle set All
Install - .Net Detection * Detect Version 2.0 All
Install - .Net Warning message No Warning Message All
Install - Add or Remove Programs: Uninstall entries List both ATI Display driver and Control Panel All
Install - ATI - Software Uninstall Utility message box No uninstall options All
Install - ATI Uninstall Utility Include ATI Uninstall Utility All
Install - Set Default Resolution Do not set Default Resolution All
InstallShield options Normal install All
Intel's Alvsio chipset X1 Detect No workaround for M2x\Enable workaround for M5x All
IRQMGR - GPIO Debounce Delay Default setting All
KMD - 10-bit Pixel Format Support via CCC Control Default Setting All
KMD - ACF Forced Fast GPU Default setting All
KMD - ACF Forced Frame Ratio Default Setting All
KMD - Context Based Power Management Default setting All
KMD - CPDMA Copy Default Setting All
KMD - Cursor Magnification Threshold Default Setting All
KMD - Disable SVM for Builds Default Setting All
KMD - Dual Graphics Branding Default setting All
KMD - Enable CF Support Default setting All
KMD - Enable OPM2 Interface (pre-15.30) Default setting All
KMD - Force WDDM Level Default setting All
KMD - Gart Check Default Setting All
KMD - Hybrid Graphics Support No keys All
KMD - Kaveri Dual Graphics Branding Concatenation No concatenation All
KMD - Low Power Tiling Default Setting All
KMD - Multi-GPU Support for WS ASICs * Enabled All
KMD - Number of Compute Rings Default Setting All
KMD - Packed Pixel Support Default setting All
KMD - S3 Fast Resume Support Default All
KMD - Smooth and Adaptive Brightness Support Enable All
KMD - SVM Support Default Setting All
KMD - VCE Cloud Gaming 2015 Support Default setting All
KMD - WDDM 2 Pt Update Option Default setting All
L0s/L1 Switching Enable L0s/L1 All
L1 in x1 PCIe Lane configuration Disable L1 in x1 PCIe Lane configuration All
Lane Switching Enable Lane switching All
Large Desktop Settings * Enable Large Desktop modes based on Video Bios and EDID All
Lasso Supoort on legacy platforms Disable Lasso support All
LCD Overdrive AC/DC switching Disable LCD AC/DC switching All
LCD Pixel clock adjustment for WWAN No adjustment All
LCD Response Time Compensation Disable LRTC or LRTC Off All
Limit maximum DFB size Do not limit the maximum size of DFB All
Line and Pixel Replication Enable line and Pixel Replication All
Liquid VR - ETW Manifest for DirectToDisplay Default setting All
Liquid VR - SDK Runtime Default setting All
Load Balancing Initial State * Active - GPU will participate in Load Balancing All
LVDS data buffer sync through LVDS interface No Change in data buffer sync through LVDS interface All
Maintain aspect ratio in clone mode "Maintain aspect ratio" in clone mode All
Mantle Binary Not Included All
Maximum number of displays enabled simultaneously Set Maximum displays based on ASIC/Board combination All
Maximum overlay bandwidth Adjustment Set maximum overly bandwidth adjustment to 100 All
Media Foundation Transform (MFT) Decoder support (13.301 and up) Included All
Media Foundation Transform (MFT) Encoder support (13.301 and up) Included All
Media Foundation Transform (MFT) HEVC Encoder Default Setting All
Media Foundation Transform (MFT) MJPEG support (13.301 and up) Included All
Media Foundation Transform (MFT) Multimedia VP9 Hybrid Decoder Default Setting All
Media Foundation Transform (MFT) WIC support (13.301 and up) Included All
MHRD file Not Included W764A
MHRD file Not Included WT64A
Miracast (Win 10) WDDM 2.0 Miracast All
Miracast (Win 8/Win 8.1) Default setting All
Mobile - Resolution of native timing Not Included All
Mobile Default Display Mapping Enable All
Mode Bandwith Validation Enable Mode Bandwith Validation All
Mode Restriction on Secondary Controller No restriction on Secondary Controller All
Modes in BIOS Mode Table Do Not Support Modes in BIOS Mode Table W764A
Modes in BIOS Mode Table Do Not Support Modes in BIOS Mode Table WT64A
MPEG2 high definition hardware decode Hardware acceleration for MPEG2 decode is always on All
Multi-GPU Power Management Enable Ultra Low Power State in Evergreen/Disable for M9x/R7x All
Multimedia - Brighter Whites Checkbox checked All
Multimedia - Camera Shake Checkbox unchecked, default values set All
Multimedia - Color Vibrance Checkbox checked, default value set All
Multimedia - Deblocking Checkbox checked, Set Deblocking default value to 50 W764A
Multimedia - Deblocking Checkbox unchecked, Set Deblocking default value to 50 WT64A
Multimedia - Denoise Checkbox checked, slider default set to 64 All
Multimedia - Dynamic Contrast Default Setting All
Multimedia - Dynamic Range Checkbox unchecked, no Dynamic Range matrix selected All
Multimedia - Edge Enhancement Checkbox checked, slider default set to 10 All
Multimedia - Enforce Smooth Video Playback Checkbox checked All
Multimedia - Flesh tone Default setting All
Multimedia - Internet Video Checkbox unchecked, Internet Video Supported All
Multimedia - Mosquito Noise Removal Checkbox checked, Set MNR default value to 50 W764A
Multimedia - Mosquito Noise Removal Checkbox unchecked, Set MNR default value to 50 WT64A
Multimedia - VP9 Hybrid Decoder Library Default setting All
Multimedia Library Enable All
Multi-UVD Enable Multi-UVD All
MUP for Dell Not included All
NB-P-State support Enable NB P-State All
Non-DDC CRT Support Disabled All
North Bridge Dynamic Power Measurement Default Setting All
OEM Custom * FirePro Generic2 All
OGL Exclusive Mode Change Disable OGL Exclusive Mode Change All
OpenCL C/C++ 1.2 legacy compiler library Default setting All
OpenGL Enable (7.57C and up) All
OpenGL "shared back/z" Normal (Disabled) All
OpenGL Configuration Setting Default setting All
OpenGL hardware rotation * Enable OpenGL hardware rotation All
Orca Binary Orca Support for XP (R6x) and Vista W764A
Orca Binary Orca Support for XP (R6x) and Vista WT64A
Overdrive 4 and 5 Support Overdrive 5 Support All
Overdrive 5- Stress Test Install OD5 Stress Test Application All
Overlap Compensation Show overlap in CCC All
Overlay Settings Driver default All
Overlay Theater Mode Supported, Initially off All
Overscan Timing on TMDS Do not remove Overscan Timing All
P1PLL workaround Enable P1PLL workaround for M52/M54 All
Panel Power based on System Bios Lid State Disable All
PCI I/O Space Allocation No keys All
PCIE Gen2 support Enable PCIE Gen2 All
PCIE lane width for BACO state 1 PCI lane for BACO state All
PG - Coarse grain GFX power gating (Internal Debuging only) Driver Default All
PG - Medium grain GFX Power Gating (Internal Debuging only) Driver default All
PG - MGPG/LBPW/NBPS No Key All
Pixel Clock (PLL) shift Do not shift pixel Clock (PLL) All
PLL off in L1 support Default Settings All
PowerPlay - All Graphic Level FRTC Down Hysteresis Default setting All
PowerPlay - BACO Delay Interval In Milli Seconds Default setting All
PowerPlay - Disable FFC Default All
PowerPlay - Disable SAMU DPM Default Setting All
PowerPlay - Disable UVD Power Gating Default Setting All
PowerPlay - Disable Voltage Island Feature Default Setting All
PowerPlay - Dummy Backend for Hardware Manager Default Setting All
PowerPlay - Enable Falcon SMC Firmware (CI+) Default Setting All
PowerPlay - Enable Falcon SMC Firmware (SI) Default Setting All
PowerPlay - Enable Post-Production SMU FW Loading Default Setting All
PowerPlay - Enable Post-Production SMU FW Loading (SI) Default Setting All
PowerPlay - Enable Upload Firmware Default setting All
PowerPlay - Falcon Quick Transition Default Setting All
PowerPlay - MCLK Switching Threshold Value Default setting All
PowerPlay - Power state default for DC Set to DC max battery All
PowerPlay - Sclk Deep Sleep Disable Default Setting All
PowerPlay - Vari-Bright level Default setting All
PowerPlay default Clocks to Balanced mode in DC default setting Do not force default clocks to Balanced mode All
PowerPlay default Clocks to Balanced mode in DC low setting Do not force default clocks to Balanced mode All
PowerPlay Disable ULPS Functionality Default setting All
PowerPlay refresh rate reduction checkbox Hide Checkbox All
PowerPlay Surface Management Support (PPSM) PPSM Disabled All
PowerPlay Workaround for no mode set No PowerPlay Workaround All
PowerXpress - AMD PCI filter driver Default Setting All
PowerXpress - AMD PCI filter driver (non-certified) Default Setting All
PowerXpress - AMD PCI filter driver install enablement Default setting All
PowerXpress - Auto Switching when power source changes Disable auto switch when power Source changes All
PowerXpress - Hotkey switch Enable hotkey switch feature for PXAA and PXAI All
PowerXpress - HPD feature Enable HPD feature for PXAA and PXAI All
PowerXpress - IGPU display blocking Switch blocking is enabled All
PowerXpress - Profile synchronization Disable profile synchronization W764A
PowerXpress - Profile synchronization Disable profile synchronization WT64A
PowerXpress - Query display connectors Enable the driver to query display connections for PXAA and PXAI All
PowerXpress - Setting factory defaults Set factory default for A+A platforms to integrated All
PowerXpress - Splash Screen Disable Splash screen All
PowerXpress - Support when CRT is active Allow PowerXpress switch when CRT is active All
PowerXpress - User confirmation Perform PowerXpress switch with user confirmation All
PowerXpress - Win7 PX Install bug Enable discreet device All
PowerXpress 3.0 - Application Profile based switch blocking APL app profiles are used and reduce switch related pop-ups All
PowerXpress 4.0: Default GPU for dynamic scheme Set default GPU as IGPU All
PowerXpress 4.0: Default PX 4.0 scheme Set default to dynamic scheme All
PowerXpress 4.0: DPPE Fixed Control Use AMD CCC UI to control SG All
PowerXpress 5.0: 0W power feature Enable 0W power feature All
PowerXpress 5.0: Extended battery mode support for PX Enable extended battery support for PX All
PowerXpress 5.0: OGL on dGPU in dynamic PX mode Enable OGL on dGPU in dymamic PX mode All
PowerXpress 5.0: SBIOS settings for power down capability Do not allow to overwrite SBIOS settings for Power down capability All
PowerXpress 5.5: AC/DC Profiles Enable All
PowerXpress 5.5: BLOB file Include rename of BLOB file All
PowerXpress 5.5: Independent driver installation for A+I (W8.1+) Enabled All
PowerXpress 5.5: Independent driver installation for A+I (Win7) Enabled All
PowerXpress 5.5: Independent driver installation for A+I (Win8) Enabled All
PowerXpress 5.5: MRU List Persistence on Reboot Enable All
PowerXpress 5.5: Protected video Playback for DGPU on A+I Disable Protected video Playback for DGPU on A+I All
PowerXpress 5.5: Shared A+I mini heap Disable All
PowerXpress 5.6: Disable Local Display Support Not Included All
PowerXpress 6.0: Long Idle Detect - Default Enabled All
PowerXpress 6.0: Long Idle Detect - Disabled Do not disable All
PowerXpress 8.0: SLS and Clone mode Default setting All
PowerXpress Co-installer (8.53 and up) Included for all ASICs All
PowerXpress Co-installer (pre-8.53) Do not add Co-installer Support All
Problem Report Enable All
Projector Page Disable the Projector Page All
Propagate VGA Expansion Setting in BIOS to Accelerated Drivers Disable All
Proxy Support Add Proxy Sections WT64A
Proxy_Gfx_Support Enabled All
Radeon GCO Driver Default All
Radeon Settings - Add and Remove Key Default Settings All
Radeon Settings - Banner Advertisements Default setting All
Radeon Settings - Catalyst/FirePro Indicator for Radeon Pro Default setting All
Radeon Settings - Click to Learn More Default setting All
Radeon Settings - Driver Update Component on UI Default setting All
Radeon Settings - Driver Upgrade Advisor for Games Default setting All
Radeon Settings - DX Version for Win 7 Default Setting All
Radeon Settings - FirePro Advanced Settings for VDI-Only Packaging Default Settings All
Radeon Settings - Hyperlink on AMD Logo Default setting All
Radeon Settings - MS WU Not Included All
Radeon Settings - Power Plan Settings Control Default setting All
Radeon Settings - Social Network Links Default setting All
Radeon Settings - System Tray Visibility Shown All
Radeon Settings - User Editable Profile Options for CrossFire Behaviour Default Setting All
Radeon Software Version Default setting All
RapidFire Binary Default setting All
Rasterization Mode Disable Block Rasterization Mode switching All
RCR 2103 Watermark Default setting All
Reduce Blanking (CVT) Use ATI to handle Reduce Blanking All
Reduce Blanking (Forced) * Force reduce blanking All
Release number format ATI All
Report attached display devices to OS during device enumeration Enable Desktop ASIC's/Disable Mobile ASIC's All
Restrict Active Displays to 2 Do Not Restrict All
Ri Authentication Use hardware RI Authentication All
RMX Sharpening Enable All
Rotated stretched desktop on consumer desktop boards Disable capability of stretching a rotated desktop All
Rotation Default mode Do not apply Rotation Default mode All
Rotation Hot Keys Disable All
Rotation Version * New Rotation All
SAMU kernel and KApp firmware binary Default Setting All
S-clock UVD branch Disable S-clock UVD branch All
SDI peer memory range workaround * Defaul no key All
Set Default Digital HDTV Underscan Default setting All
Set GartCacheableMemorySize Set GartCacheable memory to 28 All
Set Native Panel Timing Do not set Native Panel Timing All
Setting the "Jack presence" of the audio device Setting "Jack presence" of the audio device to a multiple All
Single Display Desktop (Multi-desktop) in CCC Single Display Desktop (Multi-desktop) option All
SLS Bezel support Enable SLS Bezel support All
SmartGART Disable SmartGART All
Speed for PCIE lane in ULV state Default Setting All
Split display in wide aspect ratio Disable split display in wide aspect ratio All
Spread Spectrum * Enable Spread Spectrum (SS) by default All
SSE Instructions Enable S3 resume fix issue All
Stutter mode Disable for NI All
SUN XT DDR3: Disable Clock Request Support Disabled All
Support for PCI Interupt in 2D driver Enable support W764A
Support for PCI Interupt in 2D driver Enable support WT64A
Switch Desktop Multi-function to Dual View Multi-function is enabled and dual view is disabled All
Switching displays if overlay is allocated Allow switching if overlay allocated All
Switching Displays using HotKeys when overlay is allocated Enable notification to System BIOS about overlay allocation state All
Switching Displays with Hot Keys if Exclusive Mode is set Enable All
TDR Delay Default setting All
TDR recovery on a soft reset Enable TDR recovery on soft reset All
Temp - Default Default option All
Temp - DelReg Remove All
Temp - OEM Default option-No keys All
Tiled Memory Offset Calculation Enable All
Tiling Support Enable Tiling support All
TMDS Modes Do Not Limit TMDS Modes All
TMDS Protection Enable TMDS Protection All
Transition to Hibernate from standby Do not Force LCD on All
Travis LVDS power down sequence Driver does not poll powerdown status All
TV - Overscan Button Show Overscan button All
TV 1K Mode Enable TV 1K Mode All
TV Capture Device- Shaking Video Disable All
TV Composite Filter Use the Standard setting All
TV Contrast NTSC Set Contrast to 100 All
TV Contrast NTSC (Japanese) Set contrast to 100 All
TV Contrast PAL Set contrast to 100 All
TV Dac Settings Do not force TV DAC on when TV is disabled/enabled All
TV DotCrawl Use the Frozen Setting All
TV Force Detection Do not Force Detection All
TV Luma Flicker Normal Luma setting (60) All
TV Mode Normal TV mode All
TV Restricted modes Do not restrict any TV modes All
TVOut Filters Normal All
UMD - Allow Preemtpion Default setting All
UMD - Anti-Aliasing in CCC Default setting All
UMD - Customized VQ Settings Default setting All
UMD - Disable Present CPU Queue Default Setting All
UMD - DXVA Hybrid VP9 Decoder Default setting All
UMD - Enable MJPEG compute queue Default Setting All
UMD - Override of the video heap preference Default setting All
UMD - Override of the video heap preference 2 Default setting All
UMD - Shader Cache Set to 1 All
Uninstall Clean All
Use C3 Extended HotKey Polling Interval Disable All
UVD - Max UVD Sessions Default setting All
UVD - Remove Multi Adapter Block Key Default setting All
UVD Configuration Enable UVD Support All
UVD firmware binary for Anubis Default setting All
UVD firmware binary for Ellesemere Default setting All
UVD firmware binary for Fiji Default setting All
UVD firmware binary for Raven Default setting All
UVD firmware binary for Stoney Default setting All
UVD post-processing on Flash 10.1 playback Do not force UVD post-processing All
UVD support (Linux) Enable UVD support All
UVD support for PCIE x1 lane Disable UVD on systems with PCIE x1 All
UVD5 firmware binary Default setting All
UVD6 firmware binary Default setting All
UVD7 firmware binary Default setting All
Validate Device Switch Enable Validate Device Switch All
Vari-Bright Show Vari-Bright checkbox, box checked All
Varibright - ABM Enable ABM, disable software Varibright All
Vari-bright brightness monitor program Enable VB Brightness reporting All
Vari-bright VB-2.0 Enable VariBright 2.0/Disable for PX configurations All
VBIOS image (13.25.25 only) Default setting All
VCAM Include files All
VCE - Disable Reserved VM Cache Default setting All
VCE - Power Gating Default setting All
VCE 3.0 Firmware Binary Default setting All
VCE 3.1 Firmware Binary for Carrizo Default setting All
VCE 3.4 Firmware Binary for Baffin Default setting All
VCE 3.4 Firmware Binary for Stoney Default setting All
VCE 4.0 Firmware Binary Default setting All
Video Capture Scaling Scaling to 720 All
Video Quality features in Win8 Included All
VLD for single FireMV ASIC's Disable VLD for single FireMV ASIC's All
VLD on FireMV boards * Enable VLD for FireMV boards All
Vulkan Graphics Driver/Loader Configuration Default setting All
WDM Capture Enumeration Enumerate All
Win2K 'Disable multimonitor' flag Do not add key All
WinBlue Hybrid Graphics Platform Distribution List DLL Default Setting All
Windows Redstone - Driver Store Support Default Settings All
Windows Redstone - Signing Workaround Default Setting All
Wireless Display: Limit Wireless Display to 720p and lower modes Enabled All
Workaround - S3/S4 Corruption -OGL Regression No Workaround All
Workaround for DTM crash hard hang No workaround All
Workaround for HD MPEG-2 fix Enable fix from EPR# 283394 All
X Logo on Overlay Page Hide "X" Logo All
X Overlay Page Show "X" Overlay Page All
XGD - Extended Desktop Delay Not Included All
xvYCC Support Enable xvYCC support (M9x /R7x) All
xxxxxxxxxxxxxxxx test1 All
Z_Internal ASIC bringup Add dev keys for testing All
Z_Internal QA Testing Not Included All
ZZZ Testing for Build Team Option 1 All

Addons:

Addon Option (* - override) OS
3D Studio Max Not Included All
3DSMax * Not Included All
ACP Not Included All
AFCM Driver Not Included All
AMD Cleanup Utility Not Included All
AMD IOMMU Device NULL Driver * Included All
AMD Registration Application Not Included All
AMD Survey Application Not Included All
AMD64 Driver Not Included All
AMDFDPSP Driver Not Included All
AMDKFD Driver Included - copied from source All
AMDKIOMD Driver Not Included All
AMDPSP Driver Not Included All
AppEx Not Included All
AppProfiles Not Included All
ApX_Parental Control Not Included All
ATI DVD Decoder Not Included All
ATI MCE Encoder Not Included All
ATI MCE Transcoder Not Included All
ATI Remote Wonder Do Not Include All
ATI TV Settings Not included All
ATIGART Not Included All
Audio Filter Driver (amdkmafd) * Included - Certified - (By release) All
AutoCad * Not Included All
AVIVO Codecs * Included All
AVT Included - build from source All
Catalyst Control Center - Product Branding * Not Included All
Catalyst Control Center - Vista and Win7 * Graphics - Full (all R600 ASICs and above) All
Catalyst Control Center - XP and Vista * Graphics - Full (all R300 ASICs and above) All
Catalyst Installer Customization * Workstation All
Catalyst Media Center Not Included All
CCC/Radeon Settings: Customer Branding * AMD-Workstation All
CCC: HydraVision-Full * Include All
CCC: Multimedia Preview * Include All
CCC: UCI * Not Included All
CCC: UCI uninstall utility Do not inlcude UCI uninstall utility All
CCC2: Adaptive S4 Not Included All
CCC2: Multimedia Preview * Include All
CCC2: Profile Setting * Include Desktop All
CCC2: UCI * Included for Windows Update - built from source All
Compaq Not Included All
Control Panel * Included- 7.77 and up All
Control Panel - AMD64/EMT Not Included All
Control Panel - IA64 Not Included All
Control Panel - Logos ATI All
Direct X Not Included All
Dolphin Demo Do not add Dolphin Demo All
Dot Net 3.5 Not Included All
Dot Net 4.0 * Included - Full Version All
Dot Net 4.5 Included All
Dot_Net * Include .NET 2.0 Latest All
DTV Wonder Not Included All
DX10 QFE Not Included All
eHome AIW drivers (Obsolete) Not Included All
eHome Wonder drivers Not Included All
FireGL - CATIA/Lenovo opt file install Not included All
HDMI Audio Driver (Vista/Win7/Win8/Win8.1/Win10) * Latest (Normal version) MS WHQL certified driver from Drop Box All
HDMI Audio Driver with MS Bus Driver (XP) * Included All
HDMI Audio Utility Not Included All
Hybrid Tuner QFE Not Included All
HydraVision Not Included All
HydraVision for CCC * Not Included All
HydraVision2 Not Included All
I2S Audio Driver Not included All
IBM Phildec WDM Driver Not included All
IBM Readme files IBM Readme's Not Included All
Launch AMD URL after install finishes Not included All
Legacy CCC (ACE) for XP (Dell only) Not Included All
Lenovo OEMDSPIF.DLL Not Included All
Linux display driver [DO NOT USE] Do Not Include All
Managed DirectX Not Included All
Mantle (MSI version) Not Included All
MCE Control Panel Not Included All
MM - ATI Decoder Not Included All
MM - CyberEPG Not Included All
MM - Gemstar Not Included All
MM - Multimedia Center 9.x Not Included All
MM - Parental Control/Encoder * Not Included All
MM - Sonic AuthorScript Not Included All
MM - TVW Not Included All
MM - TVW Pro Not Included All
MM - UCI Not Included All
MM - UCI WU Not Included All
MMC Nightly Not included All
Mobile Catalyst WEB Installer Not Included All
Monet Binaries Default Setting All
Monet CIM Default Setting All
Monet Images Default setting All
Monet Workaround Installer * Not Included All
Mouse Filter Disable All
Movie Maker3 Transitions Not Included All
MS QFE-DTV Not Included All
MS QFE-SB USB (KB940059-Vista) Not Included All
MS QFE-USB2.0 Not Included All
Multimedia Center Not Included All
Multimedia Center 8.x Not Included All
MUP for Dell 2.4.1 64 bit Not Included All
OEMAppProfiles Not Included All
OGL ES 2 SDK Installer Not Included All
OpenCL (8.84 and up) * Included - built from source All
OpenCL (Pre-8.84) * Included All
Performance Profiling Client (PPC) Not included All
PixelSharp Not included All
POS demos Not Included All
PowerXpress - Branding Not Included All
PowerXpress - IntelMedia Included - IVB and SNB All
PowerXpress - PX 5.0 0W PCI Filter Driver Included - Certified - (By release) All
PowerXpress - PX Profile Update (A+I) Not Included All
Problem Report Wizard Not Included All
PSPAPP Not Included All
PV-WDM drivers Not Included All
Radeon Settings Included (Complete) All
Radeon Settings - AMD DVR Not included All
Radeon Settings - Customer Branding Not Included All
Radeon Settings for MS WU (Repackage for Centralised Build only) Not Included All
RapidFire Not included All
Raptr Installer Not included All
RIO [Pre-8.15 only] Not Included All
SAI - CPUInfo Not Included All
SBDPU Not Included All
SmartGart Not Included All
SmartGart uninstall Not Included All
South Bridge Not Included All
South Bridge - A4ACPI (W8/WB/WT) Not Included All
South Bridge - ATI IDE Not Included All
South Bridge - Audio Not Included All
South Bridge - Audio64A Not Included All
South Bridge - Bolton - AHCI for Dot Hill (XP) Not Included All
South Bridge - Bolton - RAID for Dot Hill (XP/W7/W8/WB/WT) Not Included All
South Bridge - Bolton - RAIDXpert2 for Dot Hill (XP/Win7/Win8) Not Included All
South Bridge - Bolton - USB 3.0 (XP/Vista/Win7) Not Included All
South Bridge - Bolton - USB 3.0 Server OSs Not Included All
South Bridge - eMMC4.5.1 Driver Not Included All
South Bridge - eMMC5.0 Driver Not included All
South Bridge - Errata Fix Driver Not Included All
South Bridge - Filter - IOV (Null driver for IOMMU device) * Included All
South Bridge - GPIO Not Included All
South Bridge - GPIO Promontory Not Included All
South Bridge - GPIO_Legacy Not Included All
South Bridge - HSeries - AHCI (XP/Vista/W7/W8/WB/WT) * Included - according to applicable release All
South Bridge - HSeries - AHCI-4ID-HP (Vista/Win7) Not Included All
South Bridge - HSeries - CIR (Vista/W7/W8/WB/WT) Not Included All
South Bridge - HSeries - Mini IDE (XP/Vista/W7/W8/WB/WT) Not Included All
South Bridge - HSeries - RAIDXpert * Included - built from source All
South Bridge - HSeries - SATA RAID (XP/Vista/Win7) * Included - built from source All
South Bridge - HSeries - SATA RAID-4ID-HP (Vista/Win7) Not Included All
South Bridge - HSeries - SATARAID Server OSs (aka RAID_svr) Not Included All
South Bridge - HSeries - USB 3.0 (XP/Vista/Win7) * Included - according to applicable release All
South Bridge - HSeries - USB 3.0 Device Detector Not Included All
South Bridge - HSeries - USB Filter (XP/Vista/W7/W8/WB/WT) * Included - according to applicable release All
South Bridge - I2C Not Included All
South Bridge - IDEATA133 Not Included All
South Bridge - Install Not Included All
South Bridge - MIni IDE Not Included All
South Bridge - Network Not Included All
South Bridge - PCI INF Only Driver Not included All
South Bridge - RAID driver for Bristol AM4/Summit (RAID_BR) Not Included All
South Bridge - RAIDXpert2 for Bristol AM4/Summit (RAIDXpert2_BR) Not Included All
South Bridge - SATA Not Included All
South Bridge - SATARAID Not included All
South Bridge - SATARAID-64A Not included All
South Bridge - SB600-SATARAID Not Included All
South Bridge - SB600-WebPam Not Included All
South Bridge - SB6xx - IDEATA133 (aka Mini IDE) Not Included All
South Bridge - SB700-AccFilter (Vista/XP) Not Included All
South Bridge - SB700-RaidXpert (Vista/XP) Not Included All
South Bridge - SB700-SATARAID Not Included All
South Bridge - SB7XX - AHCI (XP/Vista/W7/W8/WB/WT) Not Included All
South Bridge - SB7XX - AHCI-4ID-HP Not Included All
South Bridge - SB7XX/SB8XX - CIR (Vista/W7/W8/WB/WT) Not included All
South Bridge - SB800 - RaidXpert (XP/Vista/Win7) Not Included All
South Bridge - SB800 - SATARAID-4ID-HP (Vista/Win7) Not Included All
South Bridge - SB8XX - SATARAID (aka RAID) Not Included All
South Bridge - SB8XX - USB Filter (XP/Vista/W7/W8/WB/WT) Not Included All
South Bridge - SMBus * Included All
South Bridge - SMBus Driver Not Included All
South Bridge - UART Not Included All
South Bridge - USB 2.0 Not Included All
South Bridge - USB 3.0 Zeppelin Not included All
South Bridge - USB 3.1 Promontory Not Included All
South Bridge - XGBE Driver Not included All
South Bridge (Vista) - Filter NB Not Included All
South Bridge (Vista) - Filter NB-SB Not Included All
South Bridge (Vista) - HPETFilter Not Included All
South Bridge (Vista) - HyperFlash Not included All
South Bridge (Vista) - HyperFlashCP Not included All
South Bridge (Vista) - IDEATA133 Not Included All
South Bridge (Vista) - SB400-SATARAID Not Included All
South Bridge (Vista) - SB700-SATARAID Not Included All
South Bridge (Vista/Win7) - SB600-SATARAID Not Included All
SSG Driver Not included All
Stand Alone Installer for HDMI Not Included All
Stand Alone Installer for NB Not Included All
Steady Video IE9 2.02 Not Included All
Steam Install Not Included All
Temp Default Included All
Turbine No shortcut All
TVT7Diag Not Included All
TVWonderUSB2 Not Included All
Update XP System Restore Not Included All
USB 2.0 QFE Not Included All
USB 600 Not Included All
VC10 Runtime Not Included All
VC12 Runtime Included - Built from source All
VC13 Runtime Included - Built from source All
VC15 Runtime Included - Built from source All
VC8 Runtime Included - Built from source All
Video.TPI file Not Included All
Virtualization VDI Not Included All
Vista System Rating (Winsat) Not Included All
Vulkan Runtime Default Setting All
WDM (NSP) [8.15 and up only] Not included All
WDM (T200 AV Stream) [8.15 and up only] Not included All
WDM AVS_HSUSB Not included All
WDM AVS_RIO Not included All
WDM Drivers [Pre-8.15 only] Not Included All
WDM Installer [8.15 and up only] Not included All
WDM RIO [8.15 and up only] Not included All
WDM SP [8.15 and up only] Not Included All
WDM TH_ISDB Not Included All
WDM XP64A [Pre-8.15 only] Not Included All
WDM-64 (T200 AV Stream) [developer testing only] Not included All
Win7 Transcoding API * Include All
Wireless Display 3.0 Not Included All
WMV Decoder * Included - built from source All
WoW trial version desktop shortcut Not Included All
XP MCE Encoder Not Included All
zzzDO NOT USE CCC Next - Slim Not Included All